Mobog

Submitted by: buddy 12 years ago in
http://www.mobog.com/

Send pics directly from your camera-phone to [email protected]
There are 8 comments:
Male 60
 The common rail system prototype was developed in the late 1960s by Robert Huber of Switzerland and the technology further developed by Dr. Marco Ganser at the Swiss Federal Institute of Technology in Zurich, later of Ganser-Hydromag AG (est.1995) in Ober?geri.
 The first successful usage in a production vehicle began in Japan by the mid-1990s. Dr. Shohei Itoh and Masahiko Miyaki of the Denso Corporation, a Japanese automotive parts manufacturer, developed the Common Rail fuel system for heavy duty vehicles and turned it into practical use on their ECD-U2 common-rail system mounted on the Hino Rising Ranger truck and sold for general use in 1995.[3] Denso claims the first commercial high pressure common rail system in 1995.[4]
Modern common rail systems, whilst working on the same principle sensor are governed by an engine control unit (ECU) which opens each injector electronically rather than mechanically. This was extensively prototyped in the 1990s with collaboration between Magneti Marelli,Centro Ricerche Fiat and Elasis. After research and development by the Fiat Group, the design was acquired by the German companyRobert Bosch GmbH for completion of development and refinement for mass-production Common Rail Nozzle . In hindsight, the sale appeared to be a tactical error for Fiat, as the new technology proved to be highly profitable. The Common Rail Injector Valve had little choice but to sell, however, as it was in a poor financial state at the time and lacked the resources to complete development on its own.[5] In 1997 they extended its use for passenger cars Common Rail Injector . The first passenger car that used the common rail system was the 1997 model Alfa Romeo 156 2.4 JTD,[6] and later on that same year Mercedes-Benz C 220 CDI.
Common Rail Shim & Gasket kit have been used in marine and locomotive applications for some time. The Cooper-Bessemer GN-8 (circa 1942) is an example of a hydraulically operated common rail diesel engine, also known as a modified common rail. 
0
Reply
Male 2,519
It seems my hosting company recently installed a firewall or something that blocked connectivity from my application server to my database server.

Hopefully this will be resolved soon so Mobog can start working again.

Posted 1/25/2004

0
Reply
Male 22
Yeeaahh... thats a little DISGUSTING.
0
Reply
Male 597
Im not even going to click the link
0
Reply
Female 216
Figures, I picked censored photos, and I get the most vile ones.
0
Reply
Female 2,035
Wow there are some disturbing pictures on there.
0
Reply
Male 103
Think this was found usin ice rocket ;) at least thats how i found it lol :-) Good site :-)
0
Reply
Male 10,115
Link: Mobog [Rate Link] - Send pics directly from your camera-phone to [email protected]

:-)

0
Reply